Gossen Metrawatt Secutest PAT-testers
Gossen Metrawatt PAT testers are supported in our software to approve electrical inspections. We support two Gossen Metrawatt PAT testers. It is possible to prepare reports and view them directly. This gives you direct insight into what has been inspected and certified.
With our standard reports you can get started right away! Do you have specific wishes? We like to think along and provide tailor-made solutions for your organization. Curious about the possibilities? Then contact us.
Universal test devices for testing the electrical safety of portable electrical equipment for commercial and medical applications.
SECUTEST 0701/0702-S/ SII+ SIII / S2N+10 are all imported using Centix Remote.
The Secutest SII+ NL is a universal measuring device with Dutch menus and controls. The PSI module (Printer Storage Interface) is not necessary, unless you want to store measurement data outside the meter itself because you need the meter’s internal memory. Communication with Centix Remote via RS232-to-USB.
Data output format: ASCII (CSV)
Type of connections to PC: USB or RS232-to-USB
Send data to PC
It is possible to connect both the SECUTEST itself and the SECUTEST PSI module to a PC. The import via Centix Remote 4.5 must take place by using the RS232 connection on the measuring instrument itself and not on the connection of the optional Printer.
Communication setting in the meter
The meter itself does not need to be set to any position as the interface conforms to RS232 standard. Connecting the meter via RS232-to-USB to PC will cause a COM Port to be assigned. You can then immediately start reading the meter.
Output file formats
Import via Centix Remote produces a .txt(csv) file.
- .txt output file Centix Remote
- .etc output file Gossen Metrawatt Software