Metrel PAT testers
Metrel PAT testers are supported in our software for electrical safety inspections. We support multiple Metrel PAT testers. It is possible to generate reports and view them directly. This gives you immediate insight into what has been inspected and certified. With our standard reports, you can get started right away.
If you have specific requirements, we would be happy to think along with you and provide a tailored solution for your organisation. Curious about the possibilities? Then feel free to contact us.
MI 3304 BetaGT, MI 3305 & OmegaPAT (Plus)
Centix supports reading and processing measurement results from the MI 3304 BetaGT, MI 3305 and OmegaPAT (Plus).
The MI 3304 BetaGT, MI 3305 and OmegaPAT (Plus) are dual-voltage PAT testers suitable for periodic inspections, troubleshooting and ensuring electrical safety in workshops. The testers can operate on both 230V and 110V supply voltage and are housed in a robust and waterproof enclosure.
Â
- Internal memory for up to 6,500 measurement results
- The device can download data to the tester
- The tester can be connected to a PC via both RS232 and USB
- Connect Centix Remote via USB port
Data output format: ASCII
Type of connection to PC: RS232 and USB
Â
Data transfer to PC:
The measuring instrument can be connected to a PC via RS232 or USB.
Â
Output file format:
.txt via Centix Remote
Â
Scanner connection:
USB SPP
MI 3310 25A SigmaGT
Centix supports reading and processing measurement results from the MI 3310 SigmaGT.
The SigmaGT can be used both in the field (battery-powered) and on the workbench. The instrument is equipped for testing portable residual current devices and construction site distribution boards. The tester features pre-programmed test procedures for different safety classes, a clear display with function keys and a spacious keypad.
Â
Identification scanners and local printers can be paired wirelessly via Bluetooth. Communication with label printers and barcode scanners is possible via RS232 and Bluetooth.
Â
- Memory for up to 6,000 measurement results
- Can be linked to an Android app
- Connect Centix Remote via USB port
Data output format: ASCII
Type of connection to PC: RS232 and USB
Â
Data transfer to PC:
The measuring instrument can be connected to a PC via both RS232 and USB. For use with Centix Remote, a USB connection is recommended.
Â
Output file format:
.txt via Centix Remote
Â
Scanner connection:
USB SPP and Bluetooth SPP
MI 3309 BT DeltaGT
Centix supports reading and processing measurement results from the MI 3309 BT DeltaGT.
In Metrel software (PATLinkPRO), this measuring instrument appears as DeltaGT.
Â
- Memory for up to 1,500 measurement results
- Identification scanners and local printers can be paired wirelessly via Bluetooth (communication with label printers and barcode scanners via RS232 and Bluetooth)
- Connect Centix Remote via USB port
- Firmware version: 3.1.xxx
Data output format: BINARY
Type of connection to PC: RS232, USB or Bluetooth
Â
Data transfer to PC:
Using Centix Remote, the tester can be read via the USB port. Files created by Metrel PATLinkPRO or ES-Manager (.padfx) can be imported directly into Centix.
Â
Output file format:
Centix Remote creates a file named PROJECT.padfx with a sequence number.
Â
Scanner connection:
A Bluetooth scanner cannot be paired with the MI3390 BT version. However, Metrel does supply a barcode scanner that can be linked to the measuring instrument, such as the A1105. In addition, it is possible to operate the measuring instrument directly via Metrel’s aPAT Link app. This makes it possible to scan a QR code and send it directly to the measuring instrument.
MI 3360 OmegaGT
Centix supports reading and processing measurement results from the MI 3360 OmegaGT.
The MI 3360 OmegaGT XA is available in different versions, depending on the underlying hardware. The different versions use the same protocol for data transfer.
Â
- Display: 4.3” TFT touchscreen with digital (QWERTY) keyboard
- Memory type: SD card (8GB memory, expandable to 32GB)
- Communication: RS-232, USB and Bluetooth
- Firmware version: 1.7.14.xxx (as of April 2021)
Data output format: BINARY
Type of connection to PC: RS232, USB or Bluetooth
Â
Data transfer to PC:
The tester can be connected to a PC in different ways via Centix Remote. For use with Centix Remote, a USB connection is recommended. When the tester is connected to the PC, a USB VCom Port is created. The measurement data can then be read via Centix Remote.
Â
Output file format:
Centix Remote creates a file with the .padfx extension. Files created by Metrel ES-Manager (.padfx) can be imported directly into Centix.
Â
Scanner connection:
Bluetooth SPP
MI 3365 OmegaEE XD
Centix supports reading and processing measurement results from the MI 3365 OmegaEE XD.
The MI 3365 OmegaEE XD is available in different versions, depending on the underlying hardware. The different versions use the same protocol for data transfer.
Â
- Display: 4.3” TFT touchscreen with digital (QWERTY) keyboard
- Memory type: SD card (8GB memory, expandable to 32GB)
- Communication: RS-232, USB and Bluetooth
Data output format: BINARY
Type of connection to PC: RS232, USB or Bluetooth
Â
Data transfer to PC:
The tester can be connected to a PC in different ways via Centix Remote. For use with Centix Remote, a USB connection is recommended. When the tester is connected to the PC, a USB VCom Port is created. The measurement data can then be read via Centix Remote.
Â
Output file format:
Centix Remote creates a file with the .padfx extension. Files created by Metrel ES-Manager (.padfx) can be imported directly into Centix.
Â
Scanner connection:
Bluetooth SPP
MI3155 EU & MI3155 ST
Centix supports reading and processing measurement results from the MI3155 EU and MI3155 ST.
The MI 3155EU Eurotest XD and the MI 3155ST Eurotest XE are among Metrel’s latest measuring instruments for electrical inspections.
Â
- Display: colour LCD touchscreen combined with shortcut keys
- Communication: USB and Bluetooth
Data output format: BINARY
Type of connection to PC: USB or Bluetooth
Â
Data transfer to PC:
The tester can be connected to a PC via both USB and Bluetooth using Centix Remote. For use with Centix Remote, a USB connection is recommended. When the tester is connected to the PC, a USB VCom Port is created. The measurement data can then be read via Centix Remote.
Â
Output file format:
Centix Remote creates a file with the .padfx extension. Files created by Metrel ES-Manager (.padfx) can be imported directly into Centix.
Â
Scanner connection:
USB SPP and Bluetooth SPP
MI3325 Machine and panel tester.
Centix supports reading and processing measurement results from the MI3325 Machine and panel tester.
The Metrel MI3325 machine and panel tester is suitable for testing electrical distribution boards, appliances, machines and welding equipment. The instrument can be expanded with QR code scanners, RFID readers or a remote control.
- Display: colour touchscreen with a clear user interface
- Communication: RS232, USB or Bluetooth
Data output format: BINARY
Type of connection to PC: RS232, USB or Bluetooth
Data transfer to PC:
The tester can be connected to a PC via both USB and Bluetooth using Centix Remote. For use with Centix Remote, a USB connection is recommended. When the tester is connected to the PC, a USB VCom Port is created. The measurement data can then be read via Centix Remote.
Output file format:
Centix Remote creates a file with the .padfx extension. Files created by Metrel ES-Manager (.padfx) can be imported directly into Centix.
Scanner connection:
USB SPP and Bluetooth SPP