Gossen Metrawatt PAT testers
Gossen Metrawatt PAT testers are supported in our software for inspecting electrical equipment. We support two types of PAT testers. It is possible to generate reports and view them directly. With our standard reports, you can get started right away.
If you have specific requirements, we would be happy to think along with you and provide a tailored solution for your organisation. Curious about the possibilities? Then feel free to contact us.
Secutest 0701 / 0702-S / SII / SIII / S2N+10
Centix supports reading and processing measurement results from the Secutest 0701 / 0702-S / SII / SIII / S2N+10.
Universal test instruments for testing the electrical safety of portable electrical appliances for commercial and medical applications.
Â
The SECUTEST 0701/0702-S / SII+ / SIII / S2N+10 can all be read in the same way using Centix Remote.
Â
The Secutest SII+ NL is a universal measuring device with Dutch menus and controls. The PSI module (Printer Storage Interface) is not required unless measurement data needs to be stored outside the device itself.
Â
- Communication with Centix Remote via RS232-to-USB connection
Data output format: ASCII (CSV)
Type of connection to PC: USB or RS232-to-USB
Â
Data transfer to PC:
It is possible to connect both the SECUTEST device itself and the optional SECUTEST PSI module to a PC. However, when reading data via Centix Remote, the RS232 connection on the measuring device itself must be used, not the connection of the optional printer.
Â
Communication setting in the device:
The device does not need to be set to a specific mode, as the interface complies with the RS232 standard. When the device is connected to a PC via an RS232-to-USB connection, a COM port is automatically created. The data can then be read using Centix Remote.
Â
Output file format:
.txt (CSV) via Centix Remote
.etc via Gossen Metrawatt software
SECUTEST Base IQ / Base10 IQ / Pro (IQ) / SECULIFE ST PRO IQ
Centix supports reading and processing measurement results from the SECUTEST Base IQ / Base10 IQ / Pro (IQ) / SECULIFE ST PRO IQ.
Safe and efficient testing of electrical equipment with the Secutest and the Secutest 4 Pro.
- Electrical equipment according to the Dutch NEN 3140 norm
- Medical devices according to EN 62353
- Welding equipment according to EN 60974-4
All Secutest Base systems can be read in the same way. Because all Base and Pro systems can export their data directly to a USB flash drive, the use of Centix Remote is not required.
The differences between the Secutest models do not affect Centix. These differences relate to technical specifications such as:
- Size of the internal database (number of measurement results that can be stored)
- Ability to import data into the measuring device (Pro versions)
- Types of measurements that can be performed depending on the available connections
- Operation with or without touchscreen
Data output format: ASCII (XML)
Type of connection to PC: USB and USB flash drive
Firmware version: 03.01.xxx
Data transfer to PC:
All Secutest Base / Base10 / Pro / SECULIFE ST PRO systems offer the option to export measurement results directly to a USB flash drive (FAT format).
Output file format:
.secu to USB flash drive
.txt via Centix Remote
.etc via Gossen Metrawatt software
Scanner connection:
USB SPP